5255434 Серводвигатель EMMT-AS-80-M-LS-RM

Technical Data

• Ambient temperature-40 °C ... 40 °C
• Note on ambient temperatureUp to 80°C with derating of -1.5% per degree Celsius
• Max. installation height4000 m
• Note on max. installation heightAs of 1,000 m: only with derating of -1.0% per 100 m
• Storage temperature-40 °C ... 70 °C
• Relative air humidity0 - 90%
• Conforms to standardIEC 60034
• Temperature class as per EN 60034-1F
• Max. winding temperature155 °C
• Rating class as per EN 60034-1S1
• Temperature monitoringDigital motor temperature transmission via EnDat® 2.2
• Motor type to EN 60034-7IM B5 IM V1 IM V3
• Mounting positionoptional
• Degree of protectionIP40
• Note on degree of protectionIP65 for motor shaft with rotary shaft seal IP67 for motor housing including connection components
• Concentricity, coaxiality, axial runout to DIN SPEC 42955N
• Balance qualityG 2.5
• Detent torque<1.0% of peak torque
• Bearing lifetime under nominal conditions20000 h
• Interface code, motor out80P
• Electrical connection 1, connection typeHybrid plug
• Electrical connection 1, connector systemM23x1
• Electrical connection 1, number of connections/cores15
• Electrical connection 1, connection pattern00995913
• Pollution degree2
• Note on materialsRoHS-compliant
• Corrosion resistance class CRC0 - No corrosion stress
• LABS (PWIS) conformityVDMA24364 zone III
• Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
• Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
• ApprovalRCM trademark c UL us - Recognized (OL)
• CE mark (see declaration of conformity)To EU EMC Directive To EU Low Voltage Directive In accordance with EU RoHS Directive
• UKCA marking (see declaration of conformity)To UK instructions for EMC To UK RoHS instructions To UK regulations for electrical equipment
• Certificate issuing authorityUL E342973
• Nominal operating voltage DC325 V
• Type of winding switchStar inside
• Number of pole pairs5
• Standstill torque2.6 Nm
• Nominal torque2.2 Nm
• Peak torque6.4 Nm
• Nominal rotary speed3000 rpm
• Max. rotational speed6150 rpm
• Max. mechanical speed14000 rpm
• Angular acceleration≤100000 rad/s²
• Nominal power rating of motor690 W
• Continuous stall current4.9 A
• Nominal motor current4.1 A
• Peak current17.1 A
• Motor constant0.54 Nm/A
• Standstill torque constant0.62 Nm/A
• Voltage constant, phase-to-phase37.3 mVmin
• Phase-phase winding resistance2.04 Ohm
• Phase-phase winding inductance8.9 mH
• Winding longitudinal inductivity Ld (phase)5.4 mH
• Winding cross inductivity Lq (phase)6.6 mH
• Electric time constant6.5 ms
• Thermal time constant45 min
• Thermal resistance0.78 K/W
• Measuring flange250 x 250 x 15 mm, steel
• Total mass moment of inertia of output1.035 kgcm²
• Product weight2640 g
• Permissible axial shaft load120 N
• Permissible radial shaft load620 N
• Rotor position sensorAbsolute multi-turn encoder
• rotor position sensor, manufacturer designationEQI 1131
• rotor position sensor, absolute detectable revolutions4096
• Rotor position encoder interfaceEnDat® 22
• Rotor position sensor, encoder measuring principleInductive
• rotor position sensor, DC operating voltage5 V
• rotor position sensor, DC operating voltage range3.6 V ... 14 V
• rotor position sensor, position values per revolution524288
• Rotor position transducer resolution19 bit
• rotor position sensor, system accuracy of angle measurement-120 arcsec ... 120 arcsec
• Mean time to failure (MTTF), subcomponent190 years, rotor position sensor
• Energy efficiencyENEFF (CN) / Class 2